Contact Our Sales Department Now. Dublin: 01 424 2414 | Cork: +353 (0) 21 431 6744 | UK: +44 0207 084 6219

Data and Security Specialists

OTDR - Optical Time Domain Reflectometer


An Optical Time Domain Reflectometer (OTDR) is an important instrument used by organizations to certify the performance of new fiber optics links and detect problems with existing fiber links.

Certifying New Links

The health of your network depends on the quality of your network infrastructure. This quality begins with complete certificationby contractors or systems integrators that the fiber cabling infrastructure was properly installed. Maintaining a reliable fiber plant is also essential in protecting your business-critical applications. As a network administrator, it is important to understand how to get the best performance from your cabling investment and how to solve problems quickly when they occur.

Most customers are familiar with Basic Certification - sometimes known as Tier 1 fiber certification – which measures attenuation (insertion loss), length and polarity. This test ensures that the fiber link exhibits less loss than the maximum allowable loss budget for the immediate application. Simple Light Source/ Power Meters or more automated Optical Loss Test Sets can perform this function.

Bi-Directional Testing

Bi-directional testing of fiber links for Tier 2 (OTDR) testing is not only required by industry standards and most manufacturers for warranty, it's also the only way to know the actual overall loss for a link. That's because measuring the loss of fiber connectors and splices, as well as overall link loss, depends on the test direction. Testing a fiber link in one direction can give you different results than testing the same fiber link in the opposite direction.

Because of the significant time and cost involved in testing from both ends, technicians often try to save as much time as possible by testing all links from one end before moving to the other end. Unfortunately this method does not work. To accurately test a fiber link in both directions, the launch and tail cords must remain in their initial measurement positions (even the standards say so) during both tests. But that is simply not possible if you test all the links from one end before moving to the other.

To solve this dilemma, you can test two fibers at the same time and use a loop to connect the two fibers together. This allows the two fibers of a duplex link to be tested in one shot without moving the OTDR to the far end. OTDRs like Fluke Networks’ OptiFiber® Pro feature “SmartLoop” Technology that checks for the presence of the launch, loop and tail fiber when testing a duplex fiber link. 

Detecting Problems

OTDRs are also used for maintaining fiber plant performance. An OTDR maps the cabling and can illustrate termination quality and location of faults that may hinder network performance. An OTDR allows discovery of issues along the length of a channel that may affect long term reliability. OTDRs characterize features such as attenuation uniformity and attenuation rate, segment length, location and insertion loss of connectors and splices, and other events such as sharp bends that may have been incurred during cable installation or afterwards.

When selecting the right OTDR, network engineers should make sure the tool has certain functionality, such as loss-length certification, channel/event map view, power meter capabilities, an easy-to-use interface, and smart-remote options. In addition, the OTDR needs to provide a reliable means to document the results. Features that make the OTDR easy to operate such as automated setup and Event Map are essential for users who aren’t OTDR experts but need to locate problems fast.

Tools such as the award winning OptiFiber® Pro OTDR provide the ultimate testing and troubleshooting solution to ensure the health of your most critical network cabling. With the OptiFiber Pro OTDR, network engineers have the in-house capability to perform inspection, verification, certification, troubleshooting, and documentation of fiber cabling in a single, easy-to-use OTDR tool

For more information please contact : 

email: sales@rwlas.com   phone: 01 424 2414


Dublin Office
15 Park West Road,
Parkwest,
Dublin 12

+353 (0)1 424 2414
sales@rwlas.com

Cork Office
Unit 17,
South Link Business Park,
Ballycurreen,
Cork

+353 (0)21 431 6744
corksales@rwlas.com

RWL Advanced Solutions UK
9 Devonshire Square
London
EC2M 4YF

+44 0207 084 6219
Scott Smith / Mobile / 07990 070360

ssmith@rwlas.com